 |
|
|
Kowan Still Worker
WP-150P,
WP-150PII,
WP-150PIII
(Global Sales Agents)
Virtually Noise & Vibration Free Pile Pressing Machines
Introduction
The development of hydraulically - powered, static-load sheet pile pressing equipment in response to severe constructional and environmental problems in high-density inner city areas of Japan provides a very quiet method entirely free from vibration.
Since we introduced the Kowan Still Worker into Europe in 1990, we have successfully completed over 750 contracts in Germany, France, Benelux, Switzerland, Denmark, Italy and throughout the UK.
Features/benefits
 No noise or vibration allows piling in built-up areas and in close proximity to existing services.
The WP-150P and WP-150PIII can install 800mm 0/D, 900mm 0/D and 1000mm 0/D interlocking tubular piles.
The WP-150PII can install 600mm 0/D and
700mm 0/D interlocking tubular piles.
Up to 150 ton pressing capacity
Self travelling means only a small crane is required for pitching and it can work in low headroom areas.
Radio controlled and no piling gates required means a productive safe working environment.
Unique Tilting Device allows piling up or down a gradient.
Turns corners and curves
Cost effective alternative to concrete retaining walls i.e. contiguous and diaphragm walls.
Still Worker WP-150P |
Still Worker WP-150PII |
 |
|
Still Worker WP-150PIII |
|
 |
|
Turning a corner with the Still Worker WP-150P |
 |
| |
WP-150P |
WP-150PII |
WP-150PIII |
| a |
1,030mm |
930mm |
950mm |
| b |
2,550mm |
2,500mm |
2,550mm |
| c |
1,000mm |
900mm |
1,050mm |
| d |
2,550mm |
2,500mm |
- |
| e |
3,700mm |
3,700mm |
- |
|
Technical Data
| Model |
WP-150P and WP150PII |
WP-150PIII |
| Moving System |
Self-moving |
Self-moving |
|
| Pressing-in ForceXX |
900 KN |
1,100 KN |
| Drawing-out Force |
1.000 KN |
1,200 KN |
|
| Pressing-in Speed |
3.4 - 38.0 m/min. |
2.5 - 28.0 m/min. |
| Drawing-out Speed |
3.0 - 30.0 m/min.. |
2.3 - 22.0 m/min.. |
|
| Stroke |
800mm |
800mm |
| Operation System |
Wireless radio-control &
Cabled remote-control |
Wireless radio-control &
Cabled remote-control |
|
| Tilting Device |
±5 degrees |
±5 degrees |
| Mast Rotation |
180 degrees |
180 degrees |
|
| Applicable sheet piles |
ø1000, ø900, ø800mm
PP, LT, PT
|
ø700, ø600mm
PP, LT, PT |
| Weight |
16,400 kg 16,350 kg |
15,000 kg |
|
|
|
Hydraulic Power Unit
(Standard Accessory) |
TE -200 |
| Power |
Diesel Engine
4-Cycle, Water-Cooled
Direct Injection, Turbo
|
|
| Output Rating |
147.1kw/1,800min-1 |
| Pump |
Variable-Capacity Pump |
|
| Pressure Rating |
400pa max |
| Fuel Oil tank |
350 Litres |
|
| Hydraulic Fuel tank |
550 Litres |
Dimension
Length
Width
Height |
4,025 mm
1,735 mm
1,790 mm
|
|
| Weight |
5,300kg |
|
|
|
|
|
Flash player is required and javascript enabled to view this website
