BSP - Hydraulic Drop hammer - SL type

Brochure Download

The SL range can be configured for operation from a piling mast or crane suspended and are designed for driving piles with ultimate load bearing up to 1800kN depending on site conditions. 

The low hook weight, and relatively small hydraulic power required to operate, make these hammers an economical option for the construction of pile walls, coffer dams and temporary earthworks.

Only available to hire:
Our Benefits to you:
  • Piling Plant Regularly Serviced
  • Piling Equipment Tested Before Delivery
  • World Wide Delivery of Plant Machinery
  • Modern Plant Equipment
  • Fully Maintained Piling Machinery
  • Satisfaction Guarantee
  • Breakdown Callout for all Piling Machinery
  • Safety Concious - Piling Equipment
  • Shield USP
  • Contract Maintenance for Piling Machinery
  • Dedicated Support
  • Immediate Response
  • Environmentally Aware
  • Bespoke Configuration of Piling Machinery

Using a unique BSP double-acting cylinder the ram is accelerated on its downward path to achieve higher impact energy.  The energy is developed from a short stroke leading to a high blow rate and greater pile productivity compared to an equivalent single-acting hammer.  The hammers are adjusted using a single variable flow control.  

They can be supplied with a power pack, however, if the carrier has a hydraulic base with suitable open-circuit power-take-off the hammer can be easily plumbed in to this.

  • Drives all single and double sheet piles
  • High impact to weight ratio
  • Can be suspended from small capacity cranes
  • Simple operation
  • Can pass between upstanding piles
  • Drives single and double sheet piles
  • The control box can be remote from the power pack or mounted on board
1 machine

Our UK and Ireland fleet contains the following models available for hire. Scroll the table below to view all models. We are also an exclusive distributor for this manufacturer and can offer an extended fleet which is available upon request.

Machine Model
Hammers
Ram Mass kg
Max Impact Energy kNm
Blow Rate bpm
Operating Pressure bar
Hydraulic Flow Required L/min
Typical Dimensions
Hammer Length (with legs) mm
Hammer Width mm
Hammer Weight (with legs) kg
Specification Download
Machine availability:
SL30da
 
2500
30
84
240
175
 
5970
824
5950

n/a

Hire

All dimensions are approximate and are subject to change. Please contact us if you need exact dimensions for a specific piece of equipment.

Available to hire, hydraulic piling hammers are an economical solution for the installation of all types of steel, timber or concrete piles in either land or marine environments. The versatile design allows operation by crane suspension, from piling rigs or leaders and can be via an existing power source, or by separate power pack. Energy outputs range from 20kNm to 520kNm making them ideal for cohesive soils, very dense granular soils and soft rock.

Models can: install only
  • Box Pile

    Box Piles

  • Timber/Concrete Piles

    Concrete Piles

  • H Beam Piling Profile

    H Piles

  • Straight Web Sections

    Straight Web Sections

  • Timber Piles

    Timber Piles

  • Trench Sheet Piles

    Trench Sheets

  • Tube Piling Profile

    Tube Piles

  • U Pair Piling Profile

    U Double Piles

  • U Piling Profile

    U Single Piles

  • Z Pair Piling Profile

    Z Double Piles

  • Z Piling Profile

    Z Single Piles

Models can be fitted with:
  • Extension Hoses
  • Hydraulic Hammer Pile Extension
  • Hydraulic Hammer Dolly Pile
  • Raking Sling Assembly
If you need advice on what is the best configuration for your project then please contact us.
+44 (0) 1473 748652 Email Us
Hire Enquiry

You are making a hire enquiry about:

BSP - Hydraulic Drop hammer - SL type

BSP

Contact us today for more information.

Email Team
Buy Enquiry

You are making a buy enquiry about:

BSP - Hydraulic Drop hammer - SL type

BSP

Contact us today for more information.

Email Team

Choose which depot to contact:

We have two large depots in England, each can fulfil orders to all over the world. Choose a depot closest to your destination to send your enquiry to.

Map of UK depots

T: +44 (0)1473 748652
F: +44 (0)1473 240090
E: [email protected]

51 White House Road
Ipswich, Suffolk IP1 5NT
United Kingdom


T: +44 (0)1925 265358
F: +44 (0)1925 261112
E: [email protected]

Lyncastle Road
Appleton Thorn Trading Estate
Warrington, WA4 4RE
United Kingdom

Other Hydraulic Drop Hammers

We also offer other hydraulic drop hammers in our fleet by BSP.
If you are unsure about which machine is best for you please contact our experienced sales and hire team.